Introducing the Enve Integrated Road System

Posted by Elite Custom on

WELCOME TO THE FUTURE OF HANDMADE

The modern road bike is aerodynamic, lightweight and versatile, with svelte lines and a clean aesthetic. The ENVE Integrated Front End helps bridge the gap between traditional construction and modern design.

Β 

TWO-PIECE SES AR HANDLEBAR & STEM

ONE-PIECE SES AR HANDLEBAR & STEM

Enve SES AR HandlebarΒ (Enve IN-Route)

β—‹ Sizes and Weights: 38cm (243g), 40cm (245g), 42cm (248g), 44cm (262g), 46cm (280g)
β—‹ Bar Clamp Diameter: 31.8mm
β—‹ Reach: 76mm
β—‹ Drop: 127mm
β—‹ Drop Flare: 23.5mm
β—‹ Torque Spec Clamp: 5.5Nm
β—‹ Torque Spec Controls: 6Nm-8Nm

Enve Integrated Road StemΒ (Enve IN-Route)

β—‹ Drop: -7 Degrees
β—‹ Sizes and Weights: 80mm(151g), 90mm(157g), 100mm(162g), 110mm(170g), 120mm(176g), 130mm(185g)
β—‹ Bar Clamp Diameter: 31.8mm
β—‹ Stack Height: 40mm
β—‹ Torque Spec Faceplate: 5.5Nm
β—‹ Torque Spec Steerer: 6Nm
β—‹ Included Spacers: (2) 10mm (2) 5m

ENVE One-piece SES AR Bar / Stem Combo (Enve IN-Route)

Custom Made In-House

β—‹ Stem Size Options: 90mm-130mm in 5mm increments
β—‹ Bar Width Options: 38cm, 40cm, 42cm, 44cm, 46cm
β—‹ Drop: -7 Degrees
β—‹ Weight: 315g-340g
β—‹ Reach: 76mm
β—‹ Drop: 127mm
β—‹ Drop Flare: 23.5mm
β—‹ Torque Spec Steerer: 6Nm
β—‹ Torque Spec Controls: 6Nm-8Nm
β—‹ Stack Height: 40mm
β—‹ Included Spacers: (2) 10mm (2) 5mm

Β 

Β 


ONE SYSTEM,
TWO SOLUTIONS

The ENVE Integrated Front End is compatible with headtubes designed around drop-in style IS52/IS52 headset bearings and external cup EC44/EC44 headsets alike.

Β 

Β 

EC44/EC44 HEADSET

β—‹ Premium Stainless Bearings
β—‹ Aluminum Press-In Cups for 44mm Headtubes
β—‹ Carbon Friendly Compression Ring and Dust Seal
β—‹ Weight: 138g
β—‹ Upper Stack: 20.25mm
β—‹ Lower Stack: 12mm

IS52/IS52 HEADSET

β—‹ Premium Stainless Bearings
β—‹ Carbon Friendly Compression Ring and Dust Seal
β—‹ Weight: 100g
β—‹ Upper Stack: 8mm
β—‹ Lower Stack: 1mm

Drop-In Bearing Headtube Spec

β—‹ 52mm Diameter x 8.7mm Depth Top
β—‹ 52mm Diameter x 7.5mm Depth Bottom

Β 

​

THE INTEGRATED FORK
TO TIE IT ALL TOGETHER

As one of the final pieces for this integrated system, we found an elegant solution for cable routing, and created a fork with modern amenities like hidden fender mounts and clearance for 35mm tires.

Β 

Β 

INTEGRATED ROAD DISC FORK

● 1-⅛’ to 1-½” Tapered Steer Tube with Integrated Cable Port
● Tire Width Compatibility: 700x35mm / 650x40mm (Measured)
● Rakes: 43mm, 50mm
● Axle to Crown: 371mm
● Weight: 400g
● Max Rotor Size: 160mm
● Steer Tube Length: 350mm
● Flat Mount Brake Compatibility
● Hidden Fender Mounts

Β 

Β 

Β 


Older Post Newer Post