CeramicSpeed - Ultra-low Viscosity Factory Bearing Grease

-----------------
Elite Tech Notes:

Not to be confused, there are 3 types of ceramicspeed grease. 

- All-Round (Blue) - This is the one listed. 
- Off-Road
- Race Day

Cleaning procedure:

Remove Bearing.
Remove Bearing Seals
Degrease and rinse. 
Use an air compressor to ensure the bearing is completely dry. (Important)

Application:

Apply a 60-80% fill rate for all-round, daily use. 
Ie. Fill roughly 1/2 to 3/4 of the inner cavity with grease. 
(For South East Asian tropical weather, we recommend going to the upper limit of 3/4.)

Spin the bearing to ensure the balls are well-coated.
DO NOT pack them completely solid. 

We recommend applying a thin layer of grease on the outer bearing before pressing them back into the hub. 

-----------------
All bearings need maintenance. How often you need to maintain your bearings will vary greatly, depending on a number of factors - including your cycling discipline, the climate you ride in, and the way you clean your bike. If your bike is exposed to extreme conditions or usage, it can be an advantage to perform maintenance more frequently.

Riding road or tri we recommend maintenance between 5,000-10,000 kilometers or at least once a year. For off-road disciplines, we recommend more frequent maintenance between 1,000-5,000 kilometers.

-----------------
ID360 Hub Parts / Tools:

Enve Hub Service Tool
Freehub Body
Ratchet Kit
End Caps
Bearing Kit
Drive Ring & Clip Kit
Drive Side Dust Seal